Laird Thermal Systems hat mehrere Jahrzehnte Erfahrung auf dem Gebiet der Prüfung verschiedenster Kombinationen thermischer Bauelemente zur Optimierung der Kühlleistung und Wirkungsgrade bei unterschiedlichen Wärmelasten und strengen Anforderungen an die Laufruhe. Unsere Zuverlässigkeits- und Funktionsprüfungen können an die Vorgaben des Kunden und an einschlägige Branchenstandards angepasst werden.
- Zuverlässigkeitsprüfung – Nachweis für die konstruktive Intaktheit der Peltier-Baugruppen und deren Beständigkeit gegenüber den extremen Umweltbedingungen der vorgesehenen Anwendung
- Funktionsprüfung - stellt sicher, dass die Peltier-Baugruppe die erwartete Leistung erbringt
- Konformität - prüft, ob die Peltier-Einheit die geltenden Branchenstandards erfüllt
- Qualitätskontrolle – abschließende Abnahmeprüfung zur Gewährleistung hochwertiger Produkte
Prüfkriterien
Das am häufigsten verwendete Verfahren zur Bewertung der Peltier-Baugruppen ist die Messung des Wechselstromwiderstands (AC Resistance, ACR) vor und nach der Prüfung. Im Idealfall gibt es keine Änderung. Beträgt die ACR-Abweichung mehr als 5 % gilt der Test als nicht bestanden.
Erfahren Sie nachfolgend mehr über die Prüfung von Peltier-Baugruppen. Bei Fragen wenden Sie sich bitte an Laird Thermal Systems.
Mechanische Prüfung
Mit diesem Test wird sichergestellt, dass die Leistung der thermoelektrischen Kühlerbaugruppe nicht durch unsachgemäße Handhabung des Geräts während des Transports beeinträchtigt wird. Falltests werden immer an verpackten Produkten durchgeführt.
Wie wird der Test durchgeführt?
Die verpackte Einheit wird aus der in den Verpackungsanforderungen angegebenen Höhe auf Oberflächen, Kanten und Ecken fallen gelassen
Umweltprüfung
Die Salznebel- oder Salzsprühnebelprüfung wird eingesetzt, um die Korrosionsbeständigkeit von Werkstoffen zu bestimmen und festzustellen, wie gut die Bauteile in der thermoelektrischen Kühlbaugruppe geschützt sind.
Wie wird der Test durchgeführt?
Mit einer Salzsprühnebelprüfmaschine wird eine Salzwasserlösung auf die thermoelektrische Kühlerbaugruppe in einer geschlossenen Kammer aufgebracht.
Der Wechselstromwiderstand wird vor und nach dem Test gemessen, um eventuelle Abweichungen festzustellen. Außerdem wird geprüft, ob die Farbe verblasst, Verfärbungen, Risse, Blasenbildung, Verdrehungen usw. auftreten, um sicherzustellen, dass keine Korrosion vorliegt.
This test determines the effect of mechanical stresses to the thermoelectric cooler assembly induced by rapid changes between power conditions.
How is the test performed?
- On/Off Power Cycling Power is turned on and off alternately at a specified number of cycles in a set ambient condition. Laird Thermal systems has the capability to test up to 50K+ cycles.
- Reverse Power Cycling – the thermoelectric cooler assembly is subjected to thermal stress generated by sudden changes between positive and negative power conditions. This is commonly used for PCR applications when heating and cooling occurs alternately. Laird Thermal Systems can test up to 200K+ cycles within a temperature range between 0~120℃. We also offer control of ramp up rates.
Leistungsprüfung
This testing is critical to ensure that the thermoelectric cooler assembly delivers the expected performance. The result of a number of test sessions is presented in a performance graph showing cooling capacity (Watts) versus temperature differential (ΔT) at a given ambient temperature. All our data sheet performance graphs have a tolerance of ±10%.
How is the test performed?
Air-to-Air units- The thermoelectric cooler assembly will be mounted in a test box with expected leakage rate and placed in a climatic chamber at desired ambient temperature.
- Heaters in the test box simulate heat load on the unit.
- Temperatures will be measured both at inlet and outlet of the internal and external side of the thermoelectric assembly.
- Instead of using a test box with internal heater, plates with heaters are mounted directly onto the D-plate. D-plate and heaters are insulated against ambient.
- Temperature differential (ΔT) for performance graph is calculated on inlet of external side and temperature of heater plates.
- Instead of using a test box, a liquid circuit with inline heaters is used to generate heat load.
- Temperature differential (ΔT) for performance graph is calculated at inlet temperature of external side and average temperature of liquid inlet and outlet.
This test is only applicable for thermoelectric cooler assemblies with integrated temperature control.
How is the test performed?
- Our temperature control tests are carried out in climatic chambers to simulate the intended application environment.
- The highest possible control temperature accuracy and/or stability will be determined by the temperature controller during operation.
Understanding air flow and temperature distribution is the key to developing the optimum thermal management solution. Our testing engineers utilize optimization methods on subpart level to ensure highest efficiency/noise ratio in final design.
Methods used are
- Air speed measurement
- Controllable heat injection
- Variable pump speed
- Liquid/Air pressure drop measurements
- Liquid/Air flow measurements
- Noise measurement
No matter the industry, manufacturers of any equipment are always seeking ways to reduce noise. In thermal systems, noise is generated by components such as pumps, fans and air ducts. Since it gets more complicated to reduce noise when a product is already built, Laird Thermal Systems measures and evaluates noise throughout the entire process, from the design stage and selecting components to product sign-off.
How is the test performed?
- Laird Thermal Systems utilizes acoustic analyzers with Class 1 microphone in accordance with IEC 61672 standard, enabling reliable long-term and frequency measurements.
- We perform noise measurements in accordance with ISO 12001:1996, accuracy grade 3 (survey grade) to achieve comparable results.
- If customers require standards beyond our inhouse capabilities, for example EN 3746 or EN61010-1, testing can be performed in accredited labs with our external partner.
Konformität
Laird Thermal Systems is committed to providing products that meet regulatory requirements and are environmentally safe.
Our thermoelectric cooler assemblies comply with
Our thermoelectric cooler assemblies comply with
- RoHS - the Restriction of Hazardous Substances
- REACH - the Registration, Evaluation, Authorisation and Restriction of Chemicals (Europe)
- TSCA - Toxic Substances Control Act (US)
- CA PROP 65 - Safe Drinking Water and Toxic Enforcement Act (US, California)
Electromagnetic Compatibility (EMC) and Electromagnetic Interference (EMI) testing are critical steps before bringing the thermoelectric cooler assembly to the market.
While EMI is known as the phenomenon of electromagnetic disturbance, EMC is an equipment characteristic. Not only will EMC testing determine the product’s ability to properly function in environments with electromagnetic interference, but also ensuring that it will not affect other equipment in the same environment. Both these aspects are important in the development process to ensure product safety and performance.
While EMI is known as the phenomenon of electromagnetic disturbance, EMC is an equipment characteristic. Not only will EMC testing determine the product’s ability to properly function in environments with electromagnetic interference, but also ensuring that it will not affect other equipment in the same environment. Both these aspects are important in the development process to ensure product safety and performance.
How is the test performed?
- Laird Thermal Systems engineers conduct EMC testing in accredited labs at our external partner.
- The test unit will run at intended operating conditions and the environment is set up according to applicable standard or customer specified standard.
- Our EMC testing complies with:
- Residential, commercial and light -industrial environments immunity standard EN 61000-6-1:2007
- Residential, commercial and light -industrial environments emission standard EN 61000-6-3:2007 and EN 61000-6-3/A1:2011
- Industrial environment immunity standard EN 61000-6-2:2005
- Industrial environment emissions standard EN 61000-6-4:2007 and EN 61000-6-4/A1:2011
Underwriter Laboratories (UL) is a leading global certification company known for conducting some of the most rigorous and extensive safety testing programs on the market. Not only do these tests identify and eliminate immediate danger such as electrical shock, but they also ensure that the device does not pull more current than what is allowed in intended region. Although UL testing is not mandatory for thermoelectric cooler assemblies, parts of it may be required according to certain standards.
How is the test performed?
- Laird Thermal Systems will provide UL with a testing unit and all relevant documentation in good time before product release.
- UL will test the unit at both normal and above normal operating conditions to make sure it conforms with regional standards.
- Test results will be fully transparent, and UL will provide recommendations on how to improve mechanical and electrical design to meet product requirements.
- UL certification will be successful once the product passes all testing criterion. Final test reports are available upon request.
Abnahmeprüfung
ACR or AC-Resistance is one of the main criteria in the final quality check of the thermoelectric cooler assembly. If there is a significant drop of ACR value from the initial customer specification, the thermoelectric cooler assembly may be damaged. By measuring AC-resistance we make sure it meets expected performance.
Thermoelectric cooler assemblies are checked by following criteria to ensure the delivery of high quality products:
- Dimensions are accurate to print
- No scratches or peeling paint on product surface
- Corners are chamfered, without sharp edges
- Connection points are tightened
- No missing or loose screws
- Inlet and outlet of pipes are blocked
- Product is appropriately labeled
A Hi-Pot or dielectric withstand test will make sure that insulation of the thermoelectric cooler assembly is sufficient and will not leak current at normal operating voltage conditions.