Laird Thermal Systems
OptoTEC™ OT Series OT08-18-F2-0505-11-EP-W2.25
MFG Part Number: 387001206
Legacy Product
OptoTEC™ OT Series Thermoelectric Cooler
Note: This product is not recommended for new designs.
The recommended replacement is:
      MFG Part Number: 387006794
      Description: OTX08-18-F2-0505-11-EP-W2.25

The OT08-18-F2-0505-11-EP-W2.25 is a miniature thermoelectric cooler. The OT08-18-F2-0505-11-EP-W2.25 is primarily used in applications to stabilize the temperature of sensitive optical components in the telecom and photonics industries. It has a maximum Qc of 0.9 Watts when ΔT = 0 and a maximum ΔT of 68 °C at Qc = 0.
Features
  • Miniature geometric sizes
  • Precise temperature control
  • Reliable solid-state operation
  • No sound or vibration
  • DC operation
  • RoHS-compliant

Electrical and Thermal Performance

For maximum performance, be sure to orient the CONTROL side of the TEC against the application to be managed and the AMBIENT side against the heat sink or other heat rejection method. The CONTROL side is always opposite the side with lead attachments. Lead attachment is a passive heat loss and less impactful if located on the side that attaches to the heat exchanger.


Laird Thermal Systems
OptoTEC™ OT Series OT08-18-F2-0505-11-EP-W2.25
MFG Part Number: 387001206
Legacy Product

Laird Thermal Systems
OptoTEC™ OT Series OT08-18-F2-0505-11-EP-W2.25
MFG Part Number: 387001206
Legacy Product
Specifications
Hot Side Temperature
27.0 °C
35.0 °C
50.0 °C
Qcmax (ΔT = 0)
0.9 Watts
0.9 Watts
1.0 Watts
ΔTmax (Qc = 0)
68.0°C
70.9°C
76.0°C
Imax (I @ ΔTmax)
0.8 Amps
0.8 Amps
0.8 Amps
Vmax (V @ ΔTmax)
1.9 Volts
2.0 Volts
2.1 Volts
Module Resistance
2.27 Ohms
2.36 Ohms
2.54 Ohms
Max Operating Temperature
80 °C
 
 
Weight
1.0 gram(s)
 
 

Finishing Options
Suffix
Thickness
Flatness / Parallelism
Hot Face
Cold Face
Lead Length
 11
2.438 ±0.127 mm
0.096 ± 0.0050 in
0.051 mm / 0.051 mm
0.002 in / 0.002 in
Lapped
Lapped
50.8 mm
2.00 in

Sealing Options
Suffix
Sealant
Color
Temp Range
Description
 EP
Epoxy
Black
-55 to 150°C
Low density syntactic foam epoxy encapsulant

Notes
  1.  Max operating temperature: 80°C
  2.  Do not exceed Imax or Vmax when operating module
  3.  Reference assembly guidelines for recommended installation
  4.  Solder tinning also available on metallized ceramics

Any information furnished by Laird and its agents, whether in specifications, data sheets, product catalogues or otherwise, is believed to be (but is not warranted as being) accurate and reliable, is provided for information only and does not form part of any contract with Laird. All specifications are subject to change without notice. Laird assumes no responsibility and disclaims all liability for losses or damages resulting from use of or reliance on this information. All Laird products are sold subject to the Laird Terms and Conditions of sale (including Laird’s limited warranty) in effect from time to time, a copy of which will be furnished upon request.

© Copyright 2019-2024 Laird Thermal Systems, Inc. All rights reserved. Laird™, the Laird Ring Logo, and Laird Thermal Systems™ are trademarks or registered trademarks of Laird Limited or its subsidiaries.

OptoTEC™ is a trademark of Laird Thermal Systems, Inc. All other marks are owned by their respective owners.

Revision: 00 Date: 06-01-2022

Print Date: 11-06-2024