1. Products
  2. Thermoelectric Coolers
  3. UltraTEC™ UTX Series High performance peltier coolers
  4. UTX8 12 F2 3030 TA EP W6 ( MFG Part Number: 387004695 )
Laird Thermal Systems
UltraTEC™ UTX Series UTX8-12-F2-3030-TA-EP-W6
MFG Part Number: 387004695
UltraTEC™ UTX Series Thermoelectric Cooler
The UTX8-12-F2-3030-TA-EP-W6 is a high-performance thermoelectric cooler that is assembled with advanced thermoelectric materials and can boost cooling capacity by up to 10%. The UltraTEC UTX Series features a higher thermal insulating barrier when compared to standard materials creating a maximum temperature differential (ΔT) of 71.7 °C at Qc = 0. It has a maximum Qc of 68.5 Watts when ΔT = 0.
Features
  • High heat pump density
  • Precise temperature control
  • Reliable solid-state operation
  • No sound or vibration
  • DC operation
  • RoHS-compliant

Electrical and Thermal Performance

For maximum performance, be sure to orient the CONTROL side of the TEC against the application to be managed and the AMBIENT side against the heat sink or other heat rejection method. The CONTROL side is always opposite the side with lead attachments. Lead attachment is a passive heat loss and less impactful if located on the side that attaches to the heat exchanger.


Laird Thermal Systems
UltraTEC™ UTX Series UTX8-12-F2-3030-TA-EP-W6
MFG Part Number: 387004695

Laird Thermal Systems
UltraTEC™ UTX Series UTX8-12-F2-3030-TA-EP-W6
MFG Part Number: 387004695
Specifications
Hot Side Temperature
27.0 °C
35.0 °C
50.0 °C
Qcmax (ΔT = 0)
68.5 Watts
70.4 Watts
73.7 Watts
ΔTmax (Qc = 0)
71.7°C
74.8°C
80.4°C
Imax (I @ ΔTmax)
7.9 Amps
7.9 Amps
7.8 Amps
Vmax (V @ ΔTmax)
14.6 Volts
15.1 Volts
16.2 Volts
Module Resistance
1.73 Ohms
1.80 Ohms
1.95 Ohms
Max Operating Temperature
80 °C
 
 
Weight
11.0 gram(s)
 
 

Finishing Options
Suffix
Thickness
Flatness / Parallelism
Hot Face
Cold Face
Lead Length
 TA
2.565 ±0.025 mm
0.101 ± 0.0010 in
0.025 mm / 0.025 mm
0.001 in / 0.001 in
Lapped
Lapped
152.4 mm
6.00 in

Sealing Options
Suffix
Sealant
Color
Temp Range
Description
 EP
Epoxy
Black
-55 to 150°C
Low density syntactic foam epoxy encapsulant

Notes
  1.  Max operating temperature: 80°C
  2.  Do not exceed Imax or Vmax when operating module
  3.  Reference assembly guidelines for recommended installation
  4.  Recommended to be used with a liquid heat exchanger on the hot side

Any information furnished by Laird and its agents, whether in specifications, data sheets, product catalogues or otherwise, is believed to be (but is not warranted as being) accurate and reliable, is provided for information only and does not form part of any contract with Laird. All specifications are subject to change without notice. Laird assumes no responsibility and disclaims all liability for losses or damages resulting from use of or reliance on this information. All Laird products are sold subject to the Laird Terms and Conditions of sale (including Laird’s limited warranty) in effect from time to time, a copy of which will be furnished upon request.

© Copyright 2024 Laird Thermal Systems, Inc. All rights reserved. Laird™, the Laird Ring Logo, and Laird Thermal Systems™ are trademarks or registered trademarks of Laird Limited or its subsidiaries.

UltraTEC™ is a trademark of Laird Thermal Systems, Inc. All other marks are owned by their respective owners.

Revision: 01 Date: 06-07-2023

Print Date: 12-19-2024