Today’s Recirculating Chillers Help Labs Go Green
There are several factors to keep in mind when operating and managing modern laboratories: efficiency, cost management and future-proofing. Green labs provide the blueprint for equipment optimization and environmental compliance, which in turn minimize energy consumption, lower operating costs and set labs up for continued success.
Read the article at: https://www.rdworldonline.com/todays-recirculating-chillers-help-labs-go-green/
WW5001
The WW5001 uses facility water as a hot side heat dissipation mechanism, which increases the cooling capacity while maintaining form factor. The WW Series system is designed to operate using water as coolant.
Qc Max:
OL4503
Oil cooled systems OL4503 is designed to circulate transformer oil and are used in applications where the temperature at the heat source exceeds the operational temperature limit of water-based coolants, or when special insulating properties are required within the coolant loop. The OL Series is a recirculating liquid to air heat exchanger that offers dependable, compact performance by removing large amounts of heat from a liquid circuit. The coolant pump to assure maximum flow rate. The coolant is recirculated using a high-pressure pump to assure maximum flow rate.
Qc Max:
OW4002
The OW4002 uses facility water as a hot side heat dissipation mechanism, which increases the cooling capacity while maintaining form factor. The OW Series system is designed to operate using oil as coolant.
Qc Max:
WW3001
The WW3001 uses facility water as a hot side heat dissipation mechanism, which increases the cooling capacity while maintaining form factor. The WW Series system is designed to operate using water as coolant.
Qc Max:
PCX9-3-F2-2525-TB-RT-W6
The PCX9-3-F2-2525-TB-RT-W6 is a high-performance thermoelectric cooler designed for thermal cycling between multiple temperature set points and is ideal for applications in healthcare among others, where fast temperature changes are required. The thermoelectric module is specially constructed to reduce the amount of stress induced on the thermoelectric elements during operation. It has a maximum Qc of 21.1 Watts when ΔT = 0 and a maximum ΔT of 73.6 °C at Qc = 0.
Qc Max:
PCX8-176-F2-7528-TA-RT-W6
The PCX8-176-F2-7528-TA-RT-W6 is a high-performance thermoelectric cooler designed for thermal cycling between multiple temperature set points and is ideal for applications in healthcare among others, where fast temperature changes are required. The thermoelectric module is specially constructed to reduce the amount of stress induced on the thermoelectric elements during operation. It has a maximum Qc of 104.6 Watts when ΔT = 0 and a maximum ΔT of 73.6 °C at Qc = 0.
Qc Max:
PCX8-152-F2-1773-TA-RT-W6
The PCX8-152-F2-1773-TA-RT-W6 is a high-performance thermoelectric cooler designed for thermal cycling between multiple temperature set points and is ideal for applications in healthcare among others, where fast temperature changes are required. The thermoelectric module is specially constructed to reduce the amount of stress induced on the thermoelectric elements during operation. It has a maximum Qc of 88.8 Watts when ΔT = 0 and a maximum ΔT of 73.6 °C at Qc = 0.
Qc Max: