1. product series
  2. CP Series

CP Series

Point of Care Testing

Point of care testing allows medical staff to perform real-time testing in the doctor’s office or at home. This contrasts with traditional medical laboratory testing that needs to be shipped out to a central testing center and take days to get results. Bringing testing and diagnosing closer to the patient is all an effort to improve healthcare. 

Temperature stability within the point of care testing device is the key to achieve reliable results. Because conductivity varies when blood temperature changes, blood sample’s temperature must be accurately controlled.

Thermoelectric Cooler Options

Laird Thermal Systems’ offers solid-state thermoelectric coolers with a wide range of sealing and finishing options for maximum performance in your application. In this brochure you will find all available options for our Thermoelectric coolers. All our products are made with high-grade ceramics and semiconductor materials, resulting in Best-in-Class quality performance solutions.




Download PDF:


Thermoelectric Coolers for Handheld Cosmetic Lasers

Introduction

Handheld lasers have become a standard device in cosmetic surgery and medical spa applications. Handheld cosmetic lasers offer a wide range cosmetic benefits with minimal damage to the body and reduced patient recovery time. Even though thousands of microscopic laser beams make pinpoint contact with the skin, the process does not affect the surrounding tissue. However, lasers generate a significant amount of heat that must be quickly and efficiently dissipated to protect the patient, and the laser electronics.




Download PDF:


Thermoelectric Coolers for Reagent Storage

Introduction

Analytical chemists use reagents to detect the presence or absence of a substance, or to test if a specific reaction occurs. Laboratory and medical technicians use reagents to cause a chemical or biological reaction to measure or identify a target substance. Biotechnologists consider antibodies, model organisms, oligomers, and specific cell lines as reagents to identify and manipulate cell matter. These reagents, especially those used by the biotechnologist, have narrow operating temperature windows which require refrigeration or freezing.




Download PDF:


Laird Thermal Systems Thermoelectric Coolers Efficiently Preserve Medical Reagents


CP Series thermoelectric coolers offer precise thermal management for biological reagents used in laboratory and medical testing…

October 22, 2019 – In reagent storage systems, thermoelectric coolers offer a more efficient, cost-effective and reliable thermal control method compared to other thermal technologies. Thermoelectric coolers, like the CP Series, provide active cooling below ambient temperatures to extend the life of reagents, keep replacement costs down, and ensure laboratory and medical tests are accurate and reliable. 




Download PDF:


Cooling for Centrifuges

To separate fluids, the centrifuge spins samples at a fast rate, resulting in heavy components to migrate away from the center axis and lighter components to migrate towards the axis. Centrifuge devices are widely used tools in food processing and medical research for cellular, genetic and protein analysis. When designing laboratory and medical centrifuges, several design challenges must be considered. 

CP08-127-06-L1-RT-W4.5

The CP08-127-06-L1-RT-W4.5 is a high-performance and highly reliable standard Thermoelectric Module (TEM). Assembled with Bismuth Telluride semiconductor material and thermally conductive Aluminum Oxide ceramics. The perimeter of thermoelectric module has been sealed with a non-corrosive, silicone adhesive to prevent condensation on the thermoelectric die. It has a maximum Qc of 18.7 Watts when ΔT = 0 and a maximum ΔT of 67 °C at Qc = 0 measured at a Th = 27 °C.


Qc Max:


CP08-127-05-L2-W4.5

The CP08-127-05-L2-W4.5 is a high-performance and highly reliable standard Thermoelectric Module (TEM). Assembled with Bismuth Telluride semiconductor material and thermally conductive Aluminum Oxide ceramics. The L2 version is lapped to a thickness tolerance of ±0.0005 in (±0.013 mm), which useful when combining modules thermally in parallel. It has a maximum Qc of 23.1 Watts when ΔT = 0 and a maximum ΔT of 67 °C at Qc = 0 measured at a Th = 27 °C.


Qc Max:


CP08-127-05-L1-EP-W4.5

The CP08-127-05-L1-EP-W4.5 is a high-performance and highly reliable standard Thermoelectric Module (TEM). Assembled with Bismuth Telluride semiconductor material and thermally conductive Aluminum Oxide ceramics. The perimeter of thermoelectric module has been sealed with a low density syntactic foam epoxy encapsulant to prevent condensation on the thermoelectric die. It has a maximum Qc of 23.1 Watts when ΔT = 0 and a maximum ΔT of 67 °C at Qc = 0 measured at a Th = 27 °C.


Qc Max:


Subscribe to CP Series