The OTX24-31-F1-1010-11-W2.25 is a high-performance, miniature thermoelectric cooler. The OTX24-31-F1-1010-11-W2.25 is primarily used in applications to stabilize the temperature of sensitive optical components in the telecom and photonics industries. It has a maximum Qc of 5.4 Watts when ΔT = 0 and a maximum ΔT of 72.9 °C at Qc = 0.
You can interact with the Performance Curves below to estimate the cooling performance by entering the thermal and electrical operating conditions for your application.
Click the [Save Changes] button to create a Customized PDF Datasheet.
Please Note: Actual application performance will vary from calculated values based on actual thermal design characteristics.
For maximum performance, be sure to orient the CONTROL side of the TEC against the application to be managed and the HEATSINK side against the heat sink or other heat rejection method. The CONTROL side is always opposite the side with lead attachments. Lead attachment is a passive heat loss and less impactful if located on the side that attaches to the heat exchanger.
Use the sliders, input fields and [UPDATE] button below to enter your application's electrical and thermal conditions.
Use the Graph Y and X Axis buttons to display a variety of performance curves and use the Voltage/Current slider to choose the electrical operating point to display performance.
Click [Save Changes] button to save your results as a Customized PDF Datasheet.
Cooling Power (Qc) = Watts
Current = Amps
Voltage = Volts
Power Supply = Watts
Power Dissipated (Qh) = Watts
Thot = °C
Cooling Power (Qc) = 0.62 Watts
Current = 0.34 Amps
Voltage = 0.59 Volts
Power Supply = 0.2 Watts
COP = 3.13
Power Dissipated (Qh) = 0.82 Watts
Cooling Power (Qc) = 4.56 Watts
Current = 2.8 Amps
Voltage = 3.78 Volts
Power Supply = 10.59 Watts
COP = 0.43
Power Dissipated (Qh) = 15.15 Watts
Y - Axis
X - Axis
0.098 ± 0.0050 in
0.002 in / 0.002 in
- Max operating temperature: 120°C
- Do not exceed Imax or Vmax when operating module
- Reference assembly guidelines for recommended installation
- Solder tinning also available on metallized ceramics
Any information furnished by Laird and its agents, whether in specifications, data sheets, product catalogues or otherwise,
is believed to be (but is not warranted as being) accurate and reliable, is provided for information only and does not form part of any contract with Laird.
All specifications are subject to change without notice. Laird assumes no responsibility and disclaims all liability for losses or damages resulting from use
of or reliance on this information. All Laird products are sold subject to the Laird Terms and Conditions of sale (including Laird’s limited warranty)
in effect from time to time, a copy of which will be furnished upon request.
© Copyright 2019-2022 Laird Thermal Systems, Inc. All rights reserved. Laird™, the Laird Ring Logo, and Laird Thermal Systems™ are trademarks or registered trademarks of Laird Limited or its subsidiaries.
OptoTEC™ is a trademark of Laird Thermal Systems, Inc. All other marks are owned by their respective owners.
Revision: 00 Date: 06-01-2022
Print Date: 11-24-2022