VRC2400-A1-20-BT1
MFG Part Number 387005774
Nextreme™ Value Chiller
The Nextreme™ Value Chiller offers OEMs a cost-effective and reliable thermal management solution that keeps sensitive electronics in industrial and analytical equipment at the optimum temperature. Based on the Nextreme Performance Chiller Series design, the Value line offers the same ease of use, low maintenance features and high coefficient of performance (COP) as the performance chiller but at a lower cost to provide a more competitive pricing of an OEM bundled solution. Most importantly, the Value Chiller can be configured to meet unique application requirements. By using environmentally friendly R513A refrigerant, Nextreme Chillers achieve similar performance with half the Global Warming Potential (GWP) compared to traditional hydrofluorocarbon (HFC) refrigerants. Units run on universal input 200-240V, 50/60Hz, which means that they can operate anywhere in the world.
Features
  • Economical Cooling Solution
  • Reliable Performance
  • Environmentally Friendly
  • User-Friendly
  • Application Specific Configurations




Cooling Power Operating Points
100% Water / 60Hz / 20°C Ambient Air
Cooling Power (Qc) = 2,700 Watts
Fluid Setpoint = 20 °C
Fluid ΔT @ 15.0 L/min = 2.6 °C

100% Water / 60Hz / 30°C Ambient Air
Cooling Power (Qc) = 2,500 Watts
Fluid Setpoint = 20 °C
Fluid ΔT @ 15.0 L/min = 2.4 °C

100% Water / 50Hz / 20°C Ambient Air
Cooling Power (Qc) = 2,350 Watts
Fluid Setpoint = 20 °C
Fluid ΔT @ 15.0 L/min = 2.3 °C

100% Water / 50Hz / 30°C Ambient Air
Cooling Power (Qc) = 2,200 Watts
Fluid Setpoint = 20 °C
Fluid ΔT @ 15.0 L/min = 2.1 °C

Select Graph







Technical Specifications
Performance
Nominal Cooling Capacity1
2,700 W
Setpoint Range
5°C to 40°C
Temperature Stability
±0.5°C
Nominal Operating Flowrate (60 Hz)
15.0 L/min @ 2.9 Bar
Nominal Operating Flowrate (50 Hz)
15.0 L/min @ 1.8 Bar
Refrigerant
R 513A
Operation
Coolant
Water or Water/Glycol
Operating Temperature2
15°C to 40°C
Storage temperature range (w/o coolant)
-25°C to 70°C
Humidity range
30% to 80%
Storage Humidity range
5% to 95%, non-condensing
Altitude
< 2,000 meters
Input Voltage
230 VAC
Frequency
50/60 Hz
Current
< 7.4 Amps
Maximum Forward Pressure
3.5 Bar
Compliance
ANSI / UL / CSA / IEC EN 61010-1 Edition 3
Physical
Height
699 mm
Length
563 mm
Width
482 mm
Weight
56 kg
Coolant Capacity
5 Liters
Couplings
1/2 in NPT
Standard Features
Color Touch Screen Display
Simple user interface and detailed communication of system status without the need for alarm codes or symbols.
Semi-Closed Fluid System
Sealed fluid system with breathable reservoir cap (similar to an automobile). This prevents evaporative loses, introduction of bacteria, and the need for components to prevent fluid from draining back into the system when installed below the application.
Optical Fluid Level Switch
Fluid level sensing with no moving parts.
RS-232 Communications
Complete control integration of chiller into higher level assembly control system.


Notes
  1.  Nominal capacity rating is given at a 20°C (68°F) setpoint, 20°C (68°F) ambient temperature, sea level.
  2.  For ambient conditions outside this range, please contact Laird Thermal Systems.

Any information furnished by Laird and its agents, whether in specifications, data sheets, product catalogues or otherwise, is believed to be (but is not warranted as being) accurate and reliable, is provided for information only and does not form part of any contract with Laird. All specifications are subject to change without notice. Laird assumes no responsibility and disclaims all liability for losses or damages resulting from use of or reliance on this information. All Laird products are sold subject to the Laird Terms and Conditions of sale (including Laird’s limited warranty) in effect from time to time, a copy of which will be furnished upon request.

© Copyright 2024 Laird Thermal Systems, Inc. All rights reserved. Laird™, the Laird Ring Logo, and Laird Thermal Systems™ are trademarks or registered trademarks of Laird Limited or its subsidiaries.

Nextreme™ is a trademark of Laird Thermal Systems, Inc. All other marks are owned by their respective owners.

Revision: 02 Date: 04-06-2023

Print Date: 11-21-2024